Compatible
| Car brand | Car Name | Vehicle Type | Model Year | Engine | Grade |
|---|---|---|---|---|---|
| TOYOTA | ESQUIRE | ZRR80G ZRR85G | 2014/10～ | 3ZR-FAE | |
| TOYOTA | ESQUIRE | ZWR80G | 2014/10～ | 2ZR-FXE | |
| TOYOTA | NOAH | ZRR80G ZRR85G ZRR80W ZRR85W | 2014/01～ | 3ZR-FAE | |
| TOYOTA | NOAH | ZRR80W | 2016/04～ | 3ZR-FAE | G's |
| TOYOTA | NOAH | ZWR80G ZWR80W | 2014/02～ | 2ZR-FXE | |
| TOYOTA | VOXY | ZRR80G ZRR85G ZRR80W ZRR85W | 2014/01～ | 3ZR-FAE | |
| TOYOTA | VOXY | ZRR80W | 2016/04～ | 3ZR-FAE | G's |
| TOYOTA | VOXY | ZWR80G ZWR80W | 2014/02～ | 2ZR-FXE |
Features
Brand:
BLITZ
Series:
BIG CALIPER KIT II
Material:
Made of forged aluminum
Position:
Front
Caliper:
4POT
Disk:
φ355mm/1Piece
Product description
Big Caliper Kit II
- Redesigned from the conventional product. A vehicle-specific brake caliper kit that further pursues high braking ability and controllability.
- By forging, both "lightweight" and "high rigidity" are achieved at a high level.
- A slit rotor is used to achieve high heat dissipation. It suppresses fading and keeps pad braking force in optimum condition.
- Dedicated stainless mesh Teflon brake hose is included.
- The bright metallic red caliper and black bell housing create a tight suspension.
- It is also installed in the Racing Project Tsukuba Time Attack, and its high braking force and controllability have been proven.
- Two types are available: for street use, which suppresses rotor aggression, achieves low dust and quietness, and for racing, which has excellent initial braking and enables higher braking force.
- For racing, the braking force has been increased by about 7% compared to for street use, and it is extremely effective in sports driving scenes such as circuits.
※This is an in-house comparison using the Bosch brake tester SDL (Service Diagnosis Line) using the Toyota 86.
● This kit contains all the necessary parts for installation, but does not contain chemicals such as brake fluid and brake grease.
● By installing this kit, genuine wheels cannot be installed. Thoroughly verify whether the escape of the wheel to be installed can be secured in advance.
● It is necessary to process the back plate. The processing method is free, but be careful not to deform the part to be left or leave scraps on the vehicle.
● The front center bell housing is anodized (only for some models). Alumite may peel off or fade due to continuous high temperature conditions such as when driving on a circuit. Please note that it does not affect the performance.
● When it is cold or when the brake pads are wet, brake squeal may occur due to the nature of the pads, but this is not a malfunction.
● By installing this kit, genuine wheels cannot be installed. Thoroughly verify whether the escape of the wheel to be installed can be secured in advance.
● It is necessary to process the back plate. The processing method is free, but be careful not to deform the part to be left or leave scraps on the vehicle.
● The front center bell housing is anodized (only for some models). Alumite may peel off or fade due to continuous high temperature conditions such as when driving on a circuit. Please note that it does not affect the performance.
● When it is cold or when the brake pads are wet, brake squeal may occur due to the nature of the pads, but this is not a malfunction.
Wheel escape confirmation pattern
Spec information
Caliper
●For frontForged aluminum 6POT or 4POT metallic red paint
●For rear
Forged aluminum 4POT metallic red paint
Disc
●Front1 piece type with slit φ355 / φ330 / φ302
2-piece type with slit φ355
●Rear
1 piece type with slit φ330 / φ302
Pad
【STREET Series】
●Front／Rear
Material: Non-asbestos composite material
【RACING Series】
●Front／Rear
Material: Carbon metal Ceramic composite material
Hose
● Front／RearDedicated stainless mesh Teflon brake hose is included.
A cover is attached to the mesh hose and socket joint to reduce dynamic stress on the crimped part and greatly improve durability.
In addition, the middle part of the hose is also fixed using a special metal fitting, which enables reliable mounting and is also compatible with vehicle inspections.
Product image
BLITZ Big Caliper Kit 2 has been adopted for time attack vehicles (BRZ / WRX STI) at Tsukuba Circuit while minimizing unpleasant squeal and judder on the street, even for high-spec vehicles that realize 1-minute division. Performance has been proven.
It is a braking system that is evaluated to be in the best balance without the unpleasant intervention of traction control due to the excessive effect that is often found in reinforced braking even with impressions by professional drivers.
It is a big caliper kit that has outstanding braking ability and control performance that can be used for driving on the circuit, from dress-up performance in normal street driving.
It is a braking system that is evaluated to be in the best balance without the unpleasant intervention of traction control due to the excessive effect that is often found in reinforced braking even with impressions by professional drivers.
It is a big caliper kit that has outstanding braking ability and control performance that can be used for driving on the circuit, from dress-up performance in normal street driving.
Kit for ALPHARD / VELLFIRE Front
4POT forged caliper, φ355 slit rotor
Vehicle mounting image
86 Front (ZN6)
※Common before and after MC. The photo is after MC.
86 Rear (ZN6)
※Common before and after MC. The photo is after MC.
ROADSTER Front (ND5RC)
S660 Front (jW5)
VELLFIRE Front (GGH30W)
VOXY HYBRID (ZWR80W)
SWIFT SPORT Front (ZC33S)
CIVIC Front (FC1/FK7W)
HARRIER Front (ASU60W)
WRX STI Front (VAB)
WRX STI Rear (VAB)
ESTIMA Front (GSR50W)
NX300 Front (AGZ15)
● This kit contains all the necessary parts for installation, but does not contain chemicals such as brake fluid and brake grease.
● By installing this kit, genuine wheels cannot be installed. Thoroughly verify whether the escape of the wheel to be installed can be secured in advance.
● It is necessary to process the back plate. The processing method is free, but be careful not to deform the part to be left or leave scraps on the vehicle.
● The front center bell housing is anodized (only for some models). Alumite may peel off or fade due to continuous high temperature conditions such as when driving on a circuit. Please note that it does not affect the performance.
● When it is cold or when the brake pads are wet, brake squeal may occur due to the nature of the pads, but this is not a malfunction.
● By installing this kit, genuine wheels cannot be installed. Thoroughly verify whether the escape of the wheel to be installed can be secured in advance.
● It is necessary to process the back plate. The processing method is free, but be careful not to deform the part to be left or leave scraps on the vehicle.
● The front center bell housing is anodized (only for some models). Alumite may peel off or fade due to continuous high temperature conditions such as when driving on a circuit. Please note that it does not affect the performance.
● When it is cold or when the brake pads are wet, brake squeal may occur due to the nature of the pads, but this is not a malfunction.
Repair product information
| Product Name | Caliper | MSRP | Code No. |
|---|---|---|---|
| 6POT Brake Pads for STREET | 6POT | 19,000 | 86001 |
| 4POT Brake Pads for STREET | 4POT | 16,000 | 86002 |
| 6POT Brake Pads for RACING | 6POT | 29,000 | 86004 |
| 4POT Brake Pads for RACING | 4POT | 26,000 | 86005 |
Caution
- This product page is information as of June 04, 2020.
- The product image is basically a sample. The shape and color may differ from the actual product.
- Information on conformity etc. is updated from time to time, but specifications and conformity may be changed by the manufacturer without notice.
Please be sure to check the latest information on the manufacturer's homepage before ordering.
If there are any differences, please let us know and it will be greatly appreciated. - When the manufacturer is out of stock, it may take several months for the ordered product.
If you are in a hurry, please be sure to check the stock before ordering.
We cannot accept any cancellation due to late delivery after ordering.
Reviews
No posts found